Black horizontal-slat aluminum privacy fence

Aluminum Fencing · Vancouver, British Columbia

Aluminum Fencing in Vancouver.

A Vancouver lot subdivided to add a laneway house usually needs a new property-line fence where there was none before, and a dedicated pedestrian gate onto the lane is more often the actual ask than a traditional swing gate.

In short

A subdivided Vancouver lot with a laneway house behind the main home usually needs a new property line fence where there was none before, and wrought iron corroding in a climate that rarely dries out is not the material to build that boundary from.

Built for Vancouver’s climate

Wrought iron corrodes wherever its coating is compromised, and in a climate that stays damp for months at a time, that corrosion spreads faster than it would somewhere with a real dry season to interrupt it. Wood posts and pickets rot at ground contact and need refinishing to hold their color through repeated wet seasons, and moss takes hold on wood and composite surfaces here in a way a drier climate rarely sees. Composite panels can also sag over a long span once saturated, and vinyl can go brittle in the rare hard freeze. Aluminum does not rust, rot, grow moss, sag, or go brittle. Pool barrier height, gate self-closing, and self-latching requirements are set by your municipality, worth confirming early for any yard shared between a main house and a new laneway unit.

Climate zone
NBC Zone 4 (marine, wet)
Best time to spec
March to September
What we plan for
persistent rain, moisture, and mildew

Why it suits Vancouver

Sourcing the whole set direct is what puts a laneway pedestrian gate and the new property line on the same order as any pool enclosure, in a finish that won't corrode the way wrought iron does in this much sustained moisture, so a subdivided lot gates to match on both sides. Send your layout through /brief.

Container-direct delivery into Metro Vancouver and the Lower Mainland.

How it ships to Vancouver: Freight lands right at the Port of Vancouver, Canada's largest port, in the metro itself.
Explore the full aluminum fencing range →

Explore the styles

Aluminum Fencing styles


How it works

  1. 01

    Send your scope

    Drawings, a materials list, or a rough idea. No account, no obligation. Just tell us what the project needs.

  2. 02

    We source & spec

    We match products to your climate and local code, then price them factory-direct from vetted suppliers, not off a distributor's shelf.

  3. 03

    One delivered quote

    The whole schedule comes back as a single coordinated quote, delivered to Vancouver. One order, one point of contact.


One source for the whole project

Building the whole backyard & outdoor living in Vancouver?


Common questions

Sustained moisture accelerates rust in wrought iron, rot in wood, sag in composite, and brittleness in vinyl. Aluminum resists all of it and does not need a repaint cycle to keep doing so.
A dedicated pedestrian gate onto the lane is common for that layout, alongside a sliding gate where a narrow side yard rules out a swing gate. Both are specced to the run.
Barrier height, gap spacing, and self-closing gate hardware requirements are set by your municipality. Confirm the specifics locally before finalizing a layout, particularly on West Vancouver lots with a pool built into a slope.
A dedicated pedestrian gate onto the lane is the more common request for that layout, often paired with a sliding gate where a narrow side yard rules out a swing gate. Both are specced to the run through /brief.

Nearby: Calgary · Edmonton · Toronto

Spec aluminum fencing for Vancouver.

Send drawings or a rough scope. We quote the Vancouver delivered price, all-in.